» » » TRAK TRL 1845SX

TRAK TRL 1845SX

Generous capacities and excellent performance over its entire range of motion

Like all TRAK SX Lathes, the TRL 1845SX features:

  • ProtoTRAK SLX CNC
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Optional Constant Surface Speed (CSS) Programming
  • Optional Inch Per Revolution (IPR) Programming
  • Optional TRAKing for manual control of CNC programs
  • Optional Indexer for automatic tool changes

With these important differences:

  • 18” Swing, 45” between centers
  • Spindle through hole of 2.36”
  • Geared head for excellent performance at slower speeds
  • 10 HP spindle motor
  • Machine efficiently through the full 18” of working diameter
  • High (aluminum) and low (steel) speed range settings
  • Good performance for heavy cuts on parts with diameters over 4”
  • Height of Centers – 9″
  • Distance between centers – 45″
  • Swing over bed -18.1″
  • Swing over saddle wings -17″
  • Swing over cross Slide – 9.13″
  • Cross slide travel – 10.6″
  • Tool section max – 1″
  • Coolant tank capacity – 13 gal.
  • Width of Bed – 13.4″
  • Height of Bed – 12.4″
  • Spindle Nose (Camlock) – D1-6
  • Spindle through hole – 2.36″
  • Spindle taper – MT#6
  • Taper in reduction sleeve – MT#4
  • Spindle dia at front bearing – 3.35″
  • Number of bearings – 2
  • Bearing class (radial round)- Normal
  • Spindle speed range (RPM)- 80-850, 250-2500
  • Tailstock Quill travel – 6″
    •   Quill diameter – 2.56″
    •   Quill taper hole – MT#4

  • Spindle Motor HP – 10
  • Power requirements, control – 110V; 1P; 10A
  • Power requirements, machine – 220V;3P;60Hz
  • Amps full load current – 33
  • Dimensions net – 94 x 52 x 73″
  • Dimensions shipping – 91 x 52 x 84″
  • Weight net – 3,285 lbs.
  • Weight shipping – 3,800 lbs.
  • Maximum rapid feed X – 100
  • Maximum rapid feed Z – 250
  • Coolant pump motor – 1/8 HP
  • Spindle motor brake – Dynamic braking
  • Way surface hardness – 480 – 560 HB
  • Head stock lubrication – Oil bath
  • Meehanite cast monolithic base
  • Heavy ribbed base construction
  • Bedways hardened and ground
  • Sliding surfaces Turcite coated
  • Dovetails on cross slide, V-ways on saddle
  • Adjustable saddle gibs