Home » Uncategorized » TRAK TRL 1630SX

TRAK TRL 1630SX

A great combination of low price and advanced capability.

Like all TRAK SX Lathes, the TRL 1630SX features:

  • ProtoTRAK SLX CNC
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Optional Constant Surface Speed (CSS) Programming
  • Optional Inch Per Revolution (IPR) Programming
  • Optional TRAKing for manual control of CNC programs
  • Optional Indexer for automatic tool changes

With these important differences:

  • 16” Swing, 30” between centers
  • Spindle through hole of 2.12”
  • Ideal for small parts, but a generous swing for versatility
  • At home in a toolroom
Category:
  • Height of Centers-8″
  • Distance between centers-30″
  • Swing over bed -16″
  • Swing over saddle wings-16″
  • Swing over cross slide-8.6″
  • Cross slide travel-8.5″
  • Tool section max 3 /4″
  • Coolant tank capacity- 9.3 gal.
  • Width of Bed-12.6″
  • Height of Bed-12.6″
  • Spindle Nose (Camlock)-D1-6
  • Spindle through hole-2.12″
  • Spindle taper-MT#6
  • Taper in reduction sleeve -N/A
  • Spindle dia at front bearing-3.15″
  • Number of bearings-2
  • Bearing class (radial round)-P5
  • Spindle speed range (RPM)-150-2500
  • Optional Tailstock Quill travel-6.3″
    • Quill diameter-2.36″
    • Quill taper hole-MT#4
  • Spindle Motor HP -7.5
  • Power requirements, control-110V; 1P; 8 A
  • Power requirements, machine-220V;3P;60Hz
  • Amps full load current-25
  • Dimensions net – 83 x 40 x 56″
  • Dimensions shipping – 87 x 45 x 67″
  • Weight net – 2,875 lbs.
  • Weight shipping – 3,420 lbs.
  • Maximum rapid feed X – 100
  • Maximum rapid feed Z – 150
  • Coolant pump motor -1/8 HP
  • Spindle motor brake – Dynamic braking
  • Way surface hardness – 400 – 450 HB
  • Head stock lubrication – Oil bath
  • Sliding door for easy set-ups
  • Bedways hardened and ground
  • Sliding surfaces Turcite coated
  • Dovetails on cross slide, V-ways on saddle
  • Adjustable saddle gibs