» » » Standard Industrial Straight Side Hydraulic Presses

Standard Industrial Straight Side Hydraulic Presses

Model AM Straight Side Press

The model AM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model AM also allows front to back off-center loading within +,- 6″ of the centerline of the bed. If off-center loading is required the entire front to back width of the bed then the model CM press should be considered. Contact the factory for details on the differences in these presses.

The model AM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses however has a smaller price tag than the extremely heavy duty CM style presses. The AM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model AM is designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The AM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

CM Straight Side Press

The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model CM also allows full front to back off-center loading the entire width of the press bed. No other design of press will give you more tonnage over the bed area.

The model CM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses. The CM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model CM is truly designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The CM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

DCS Straight Side Press

The model DCSS is the pinnacle of the straight side press configuration, there simply is no design that is more heavy duty. Built similarly to the DC style press, the DCSS takes yet another step toward providing the most frame strength available on any press on the market. The DCSS has enclosed end frames in lieu of the gap therefore allowing the least amount of deflection and the most rigidity. The operator can still however have material or die pass through with windows located in the end frames. Built with the same hydraulic system and solid welded construction as the DC, the DCSS gives you another layer of strength for even the most punishing applications. Typically the bed and ram would stay within the frames, but optionally you can order the DCSS with ram and/or bed extensions to extend beyond the frames to give you even more die area.

The DCSS is also available up to 1,000 tons and is perfect for center load and off center loads left to right and /or front to back as well as virtually any other press application. A hydraulic press of this type offers full tonnage throughout the stroke and 3 ram speeds (fast approach, slow press and fast return). This is useful for a variety of work such as forming, punching, drawing plus any other even tonnage application. With exceptional speeds and bed sizes as well long stroke and open height, you will find the base machine to fit most customer requirements.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

 Forming TonsPunching TonsStrokeBed SizeRam Plate Size
AM100-24-96100 Tons66 Tons24 in96 in14 in
AM100-24-120100 Tons66 Tons24 in120 in14 in
AM100-30-144100 Tons66 Tons30 in144 in14 in
AM200-24-96200 Tons130 Tons24 in96 in16 in
AM200-24-120200 Tons130 Tons24 in120 in16 in
AM200-30-144200 Tons130 Tons30 in144 in16 in
AM325-24-120325 Tons215 Tons24 in120 in16 in
AM325-30-144325 Tons215 Tons30 in144 in16 in
AM400-24-120400 Tons265 Tons24 in120 in20 in
AM400-30-144400 Tons265 Tons30 in144 in20 in
AM500-24-120500 Tons330 Tons24 in120 in20 in
AM500-30-144500 Tons330 Tons30 in144 in20 in
CM100-48-96100 Tons66 Tons48 in96 in14 in
CM100-48-120100 Tons66 Tons48 in120 in14 in
CM100-48-144100 Tons66 Tons48 in144 in14 in
CM200-48-96200 Tons130 Tons48 in96 in16 in
CM200-48-120200 Tons130 Tons48 in120 in16 in
CM200-48-144200 Tons130 Tons48 in144 in16 in
CM300-48-120300 Tons200 Tons48 in120 in16 in
CM300-48-144300 Tons200 Tons48 in144 in16 in
CM400-48-120400 Tons265 Tons48 in120 in20 in
CM400-48-144400 Tons265 Tons48 in144 in20 in
CM500-48-120500 Tons330 Tons48 in120 in20 in
CM500-48-144500 Tons330 Tons48 in144 in20 in
DCSS4040 Tons26 Tons15 x 15 in18 x 18 in10 in
DCSS100100 Tons66 Tons16 x 19 in18 x 22 in10 in
DCSS150150 Tons100 Tons16 x 19 in24 x 22 in10 in
DCSS200200 Tons130 Tons20 x 23 in24 x 26 in12 in
DCSS250250 Tons165 Tons22 x 25 in24 x 28 in12 in
DCSS300300 Tons200 Tons24 x 29 in24 x 32 in12 in
DCSS400400 Tons260 Tons24 x 29 in30 x 32 in12 in
DCSS500500 Tons330 Tons26 x 35 in30 x 32 in12 in
DCSS600600 Tons400 Tons32 x 37 in32 x 40 in12 in