Standard Industrial Straight Side Hydraulic Presses
Standard Industrial Straight Side Hydraulic Presses

Model AM Straight Side Press

The model AM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model AM also allows front to back off-center loading within +,- 6″ of the centerline of the bed. If off-center loading is required the entire front to back width of the bed then the model CM press should be considered. Contact the factory for details on the differences in these presses.

The model AM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses however has a smaller price tag than the extremely heavy duty CM style presses. The AM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model AM is designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The AM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

CM Straight Side Press

The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model CM also allows full front to back off-center loading the entire width of the press bed. No other design of press will give you more tonnage over the bed area.

The model CM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses. The CM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model CM is truly designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The CM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

DCS Straight Side Press

The model DCSS is the pinnacle of the straight side press configuration, there simply is no design that is more heavy duty. Built similarly to the DC style press, the DCSS takes yet another step toward providing the most frame strength available on any press on the market. The DCSS has enclosed end frames in lieu of the gap therefore allowing the least amount of deflection and the most rigidity. The operator can still however have material or die pass through with windows located in the end frames. Built with the same hydraulic system and solid welded construction as the DC, the DCSS gives you another layer of strength for even the most punishing applications. Typically the bed and ram would stay within the frames, but optionally you can order the DCSS with ram and/or bed extensions to extend beyond the frames to give you even more die area.

The DCSS is also available up to 1,000 tons and is perfect for center load and off center loads left to right and /or front to back as well as virtually any other press application. A hydraulic press of this type offers full tonnage throughout the stroke and 3 ram speeds (fast approach, slow press and fast return). This is useful for a variety of work such as forming, punching, drawing plus any other even tonnage application. With exceptional speeds and bed sizes as well long stroke and open height, you will find the base machine to fit most customer requirements.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

Read more
Standard Industrial C-Frame Hydraulic Presses
Standard Industrial C-Frame Hydraulic Presses

MODEL CC C-FRAME PRESS The model CC C-frame press is perfect for applications requiring center-loads or even tonnage across the bed. Available in tonnages from 35 up to 300 tons (larger tonnages available with special quote). A Hydraulic press of … Read More

Read more
Standard Industrial 4-Column Hydraulic Presses
Standard Industrial 4-Column Hydraulic Presses

The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machined platen is fitted with bearings made of A660 bronze and rides on 4 columns of turned, ground & polished chrome steel. The massive structure is fabricated from heavy sections of prime steel plate. This press is designed for heavy production work for all sizes of facilities. The self-contained hydraulic system uses a hi-low circuit using directional valves for speed control. As with all Standard Industrial machines, the model AP comes with our unmatched 5 year warranty, plus T-slots in the bed and ram, a decompression system, overload protection and many more impressive standard features.

Model AP1000 (1,000 ton) shown with optional rubber pad enclosure mounted under ram. All other features shown are standard equipment.

Read more
Standard Industrial Shears
Standard Industrial Shears

Standard Industrial Shears
The model AS shear is a 100% U. S. Made hydraulic, true guillotine drive shear with many standard features and an extremely wide variety of options to choose from. The hydraulics and electrics are complete including oil filter, disconnect switch, magnetic starter and control voltage transformer. A set of premium, four edge blades with shock resistant, chrome alloy are standard on all new shears. There is not a more heavy duty, versatile shear manufactured in the U.S.A. or any other country.

Component Availability
As with all Standard Industrial machinery, all hydraulic and electric components are readily available off the shelf from your local suppliers. These components are available today and will be available thirty years from now from such major suppliers like Siemens electrics and Vickers hydraulics. With Standard Industrial you have our substantial 5 year parts warranty and after the warranty you have the luxury of buying locally or from us giving you a lifetime supply of replacement parts that are readily available.

The Bellcrank Linkage System
The model AS is a hydraulic shear with the advantage of full tonnage throughout the stroke, and full tonnage throughout the length of the table during the entire shearing process from start to finish. Our system features a single hydraulic cylinder, this one large bore cylinder powers the bellcrank linkage system. This system has the advantage of a positive, precision mechanical drive coupled with the ease and safety of a hydraulic power plant. There are not multiple cylinders or pivoting swing-beam drives causing distortion. This drive system is how we provide full tonnage along the table and there is no balancing required, just straight tonnage.

Read more
Standard Industrial Press Brakes
Standard Industrial Press Brakes

Applications

  • Full length bends where full tonnage across the bed is a necessity for the truest bends
  • Off-center loading when any amount of the brakes tonnage is needed across the bed
  • Center loading where any amount of the brakes tonnage is required
  • Multiple die set-ups across the bed that require varying amounts of tonnage
  • Punching applications in one area or at varied locations across the bed – each brake has a counter balance valve to allow the least shock to the hydraulic system
  • Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision.
  • Any Size Facility will benefit for the Standard Industrial brake from the price conscious smaller facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtime
Read more